PDF · KernsOptic
Product configuration sheet
KernsOptic configuration fields and assembly requirements.
PLC splitter · Product presentation
Optical power distribution
PLC splitter
A planar lightwave circuit splitter divides an optical input among multiple output paths. The split ratio, connector arrangement and package are selected together for distribution boxes, passive networks and equipment assemblies.
- Single-input, multiple-output configuration
- Balanced branch selection
- Fiber tails and connectors identified by port
Configurations
Inquiry choices · custom configurations by drawing
| Port layout | Split arrangement | Termination selection | Assembly format | Inquiry |
|---|---|---|---|---|
| 1 × 2 | Two balanced outputs | SC / APC or requested interface | Mini / packaged assembly | Inquire |
| 1 × 4 | Four balanced outputs | SC / APC or requested interface | Mini / packaged assembly | Inquire |
| 1 × 8 | Eight balanced outputs | SC / APC or requested interface | Mini / packaged assembly | Inquire |
| 1 × 16 | Sixteen balanced outputs | SC / APC or requested interface | Mini / packaged assembly | Inquire |
| 1 × 32 | Thirty-two balanced outputs | SC / APC or requested interface | Mini / packaged assembly | Inquire |
Specification fields
| Parameter | Configuration |
|---|---|
| Technology | Planar lightwave circuit |
| Port layout | 1 × N; each output identified |
| Split selection | 1 × 2 / 4 / 8 / 16 / 32 inquiry range |
| Fiber and tails | Fiber grade, buffer and lead length |
| Connector arrangement | Input and output connector / polish |
| Optical acceptance | Per-port insertion loss, uniformity, PDL and return loss |
Loss limits include the agreed wavelength band and connector condition. Ideal split loss is not the finished device insertion loss.
Product details
Does splitting power add loss?
An equal 1 × N splitter has an ideal split loss of 10 log10(N) dB. Excess loss and connectors add to that value; the finished part has a separate insertion-loss limit.
Which performance values matter besides insertion loss?
Uniformity compares output branches. PDL describes polarization sensitivity; return loss and directivity describe unwanted reflected or reverse paths.
Documents
KernsOptic product configuration information
PDF · KernsOptic engineering reference
Mini Plc Splitter
Reference values pending Kanghao engineering confirmation. Technical comparison data; final build ratings require a confirmed specification.
Your configuration
Product inquiry
A drawing, configuration or part reference is enough to start. Custom production is normally 4–10 weeks; samples and pilot quantities are quoted.
