PDF · KernsOptic
Product configuration sheet
KernsOptic configuration fields and assembly requirements.
Connector components · Product presentation
Termination components
Connector components
Connector parts define the termination between the fiber, ferrule, connector housing and cable. A matched component set keeps the polishing, crimping and boot interfaces consistent through assembly.
- Ferrule and housing matched by connector family
- Crimp parts selected for cable construction
- Component or preassembled-kit supply scope
Configurations
Inquiry choices · custom configurations by drawing
| Component set | Connector family | Fiber / cable category | Assembly scope | Inquiry |
|---|---|---|---|---|
| Ferrule + housing | LC | Singlemode / multimode | Termination components | Inquire |
| Ferrule + housing | SC | Singlemode / multimode | Termination components | Inquire |
| Crimp + boot | LC | 900 µm / 2.0 / 3.0 mm | Rear termination set | Inquire |
| Crimp + boot | SC | 900 µm / 2.0 / 3.0 mm | Rear termination set | Inquire |
| Connector kit | LC / SC | Matched termination | Complete component list | Inquire |
Specification fields
| Parameter | Configuration |
|---|---|
| Connector families | LC or SC termination format |
| Fiber fit | Ferrule bore and fiber cladding compatibility |
| End-face geometry | UPC or APC process and housing selection |
| Cable termination | Rear post, crimp ring and boot fit |
| Assembly definition | Bill of materials and part revision |
| Optical acceptance | Measured on the finished termination |
A component set is selected as a matched system. Connector dimensions and ferrule bore tolerances are controlled by its part drawing.
Product details
Does a connector kit include the ferrule?
The bill of materials defines the contents. Some kit systems specify the ferrule separately; the component list should identify it explicitly.
Can a component be supplied by an existing part reference?
A manufacturer reference or drawing revision can identify the fit and assembly scope without relying on the package photograph.
Documents
KernsOptic product configuration information
PDF · KernsOptic engineering reference
Sc Standard Connector
Reference values pending Kanghao engineering confirmation. Technical comparison data; final build ratings require a confirmed specification.
Your configuration
Product inquiry
A drawing, configuration or part reference is enough to start. Custom production is normally 4–10 weeks; samples and pilot quantities are quoted.
