PDF · KernsOptic
Product configuration sheet
KernsOptic configuration fields and assembly requirements.
Strain relief boots · Product presentation
Connector accessories
Strain relief boots
A boot supports the cable where it leaves a fiber connector. Selecting the connector-side fitting and cable entry together gives the termination a controlled transition without relying on color to identify compatibility.
- Connector-specific rear fitting
- Buffered fiber and jacketed cable variants
- Color identification for assembly work
Configurations
Inquiry choices · custom configurations by drawing
| Connector family | Entry selection | Assembly format | Identification | Inquiry |
|---|---|---|---|---|
| LC | 900 µm | Mini boot | Connector body + buffered fiber | Inquire |
| LC | 2.0 mm | Mini or standard profile | Jacketed patch cable | Inquire |
| LC | 3.0 mm | Mini or standard profile | Jacketed patch cable | Inquire |
| SC | 900 µm | Buffered-fiber boot | Pigtail termination | Inquire |
| SC | 2.0 / 3.0 mm | Cable boot | Jacketed patch cable | Inquire |
Specification fields
| Parameter | Configuration |
|---|---|
| Primary fit | Connector rear housing / crimp system |
| Cable-entry choices | 900 µm, 2.0 mm or 3.0 mm |
| Profile | Mini or standard, matched by drawing |
| Color | Selected to match the assembly marking |
| Supply form | Loose boot or matched termination set |
| Mechanical rating | Evaluated on the completed termination |
Nominal cable size identifies the entry category. It does not define the boot fitting or establish interchangeability between connector brands.
Product details
Are boots with the same cable diameter interchangeable?
Cable diameter is one fit dimension. The attachment lip, rear post and crimp hardware also have to match.
Can colors be mixed in one order?
List the connector, entry size and quantity for each color so that mechanically different parts remain separate.
Documents
KernsOptic product configuration information
PDF · KernsOptic engineering reference
Lc Two-Piece Connector
Reference values pending Kanghao engineering confirmation. Technical comparison data; final build ratings require a confirmed specification.
Your configuration
Product inquiry
A drawing, configuration or part reference is enough to start. Custom production is normally 4–10 weeks; samples and pilot quantities are quoted.
