PDF · KernsOptic
Product configuration sheet
KernsOptic configuration fields and assembly requirements.
Strain relief boot · Product presentation
Single boot configuration
Strain relief boot
A replacement or production boot is selected for one defined connector and cable combination. The rear attachment, entry bore and boot profile determine fit before color and packing quantity are specified.
- One defined rear-interface geometry
- Cable-entry selection for the termination
- Color and packing identified by line item
Configurations
Inquiry choices · custom configurations by drawing
| Cable category | Connector reference | Profile | Fit information | Inquiry |
|---|---|---|---|---|
| 900 µm buffer | LC / SC family | Mini / buffer boot | Rear fitting + buffered fiber | Inquire |
| 2.0 mm jacket | Defined connector body | Standard / mini | Rear fitting + cable jacket | Inquire |
| 3.0 mm jacket | Defined connector body | Standard / mini | Rear fitting + cable jacket | Inquire |
| Other cable | Drawing reference | Dimensioned profile | Entry bore + attachment dimensions | Inquire |
Specification fields
| Parameter | Configuration |
|---|---|
| Connector-side dimensions | Attachment diameter, lip and engagement length |
| Cable-side dimensions | Entry bore and cable outer diameter |
| Nominal entry categories | 900 µm / 2.0 mm / 3.0 mm |
| Length definition | Total length and supported cable transition |
| Color and material | Defined on the selected part specification |
| Supply unit | Individual part; quantity by configuration |
Cable-entry categories are selection references. The exact boot length, material and attachment dimensions belong to the selected part drawing.
Product details
Can I choose a boot by color alone?
Color identifies an assembly convention. Fit still depends on connector geometry and cable diameter.
Which dimensions identify a replacement?
The connector attachment, entry bore and total profile length are the useful measurements, together with the original connector reference.
Documents
KernsOptic product configuration information
PDF · KernsOptic engineering reference
Sc Standard Connector
Reference values pending Kanghao engineering confirmation. Technical comparison data; final build ratings require a confirmed specification.
Your configuration
Product inquiry
A drawing, configuration or part reference is enough to start. Custom production is normally 4–10 weeks; samples and pilot quantities are quoted.
